Søk etter produkter:


PSSI AS
P.O.Box 418
N-3002 Drammen


Phone : +47 40004325
Fax : +47 32 89 90 91
post@pssi.no

PSSI Service
Vaktelefon 24t
928 273 41

PSSI AS Nyheter Referanser Nyheter Kontakt Startside
 

PSSI AS - REFERANCE LIST



HIGH PRESSURE PITOT TUBE PUMPS FOR CO2 REMOVAL HP LEAN AMINE PROJECT - STATOIL ÅSGARD B.


PSSI AS and ROODHART EMISION CONTROL BV supply 2 off complete GTO Superduty API 610 pitot tube pump units including sealing system according to API PLAN 53B and 54 for the CO2 removal project, HP Lean Amine pumps to StatoilHydro platform Åsgard B. Contractor: APPLYSØRCO

The complete pump package consisting off:

  • ROODHART GTO Superduty single stage Pitot tube pumps to perform a flow of 85 m3/h and 85 bar, in Super duplex material, fitted with double mechanical seal.
  • ROODHART Sealing system API PLAN 53B for each pump and 1 off buffer tank for back up according to API PLAN 54.
  • Monninghoff stainless steel membrane couplings type Arcoflex 314 in ATEX and according to API.
  • Siemens/Flender electric motor and gearbox.
  • Roodhart special engineered base plates to fit direct in to the deck of the platform.
  • Noise enclosure from Slåttland group for both pump units.

The pitot tube design is the perfect solution for high pressure applications that demand variable flows while maintaining stable operating conditions. Where conventional centrifugal and piston pumps have a narrow window of operation the GTO SUPERDUTY can operate anywhere on the curve.

MORE INFORMATION CO2 REMOVAL PROJECT STATOILHYDRO, AASGARD B PLATFORM (LINK)



 

ROODHART GEAR PUMPS (12 OFF) FOR OIL LUBRICATION TO ODFJELL DRILLING.

PSSI supplied 12 off Roodhart gear pump type RT including stainless steel SS-316 covers to Odfjell Drilling

The complete pump package included 

  • 12 complete gear pumps units from Roodhart including electric driven motor, membrane couplings mounted on a base frame. 
  • Custom made Stainless steel covers for the complete pump skid with air intake/outlet for cooling of the electric motors and connections for inlet/outlet of the pump. 
  • Hydrostatic testing of the mechanical seal and wetted parts done by PSSI Service.
  • All pump units Laser aligned and shimed with full report before shipment to end user. 

The internal lobe pump series RT from Roodhart is recommended for lubrication oil applications. Pump series (RT) is available in seven sizes with very low noise level. 

More information on Roodhart gear pumps (here).



3 OFF BASKET STRAINERS (12“) SURFACE PROTACTED WITH THISTLEBOND COATING TO SONGA OFFSHORE.

PSSI AS have supplied 3 off 12” Basket strainers type BF125 that have been surface protected with “Thistlebond” coating to increase the life time between failures.

Manufacture: Sure Flow Equipment Inc

SURFACE AND COATING PROCEDURES BY PSSI SERVICE

More information regarding SUREFLOW basket strainers (here) and referance list of other coating jobs (here)



 

HIGH PRESSURE TRIPLEX PLUNGER MUD PUMP, DIESEL DRIVEN UNIT TO SWIRE OILFIELD SERVICES.

The pump units to be build in separate containers driven by a ATEX approved  diesel engine and Allison transmission.

Capacity: 1300 l/min @ 11.000 PSI

The complete pump package includes:

  • Roodhart horizontal single acting piston triplex mud pump type KNS6000S according to API and fully ATEX approved.
  • DETROIT 600 HP (447 kW) diesel engine fully ATEX approved in temperature class T3 and Allison 4700FS transmission unit with air starter.
  • Water feed and pressurizing centrifugal pumps.
  • DNV approved containers.
  • Water, Diesel and Oil lubrication tanks.
  • Internal (built in) AB Control panel for operation of the complete system and one external control unit.
  • Weigh and measurements of total 16.000kg - 8,2 x 4,3 x 2,4m.
  • Valves, densimeter, gauges, emergency shutdown (lubrication, air, temperature low flow), spark arrestor, Flame trap to mention some of units installed.

More information regarding Roodhart triplex mud pumps (here).





 
 
© PSSI AS